Complete Benchtop Prototype Anodizing Lab
Technic Benchtop Prototype Anodizing Lab is a compact and complete manual line with a small footprint. It has two compartmentalized stations to provide a full anodizing process. One pre-finish module for cleaning and surface modification. The second module for anodizing and post-treat for dye and seal. The system is available separately as a stand-alone module with all surface preparation done offline.
This entry-sized system is perfect for machine shops and OEM manufacturers interested in bringing their prototyping and R&D capabilities in-house. Specific anodizing processes may be developed and optimized for application testing. This is a highly engineered, well-built compartmentalized tank system exhibiting quality workmanship for years of service.
Application: Type II Conventional Sulfuric .4-.7 mil coating
Our Benchtop Prototype Anodizing Lab is a compartmentalized system that comes fully assembled for electricity and plumbing. All controls are mounted into the cabinet behind the process tanks. The rectifier is mounted into a dog house compartment integrated into the console. The system-matched chiller is specified to maintain constant anodizing temperature. Filtration is included. Each module has an integrated containment pan.
Module One: Pretreatment- 4 poly tanks 15” x 15” x 15”, two heaters.
Tank Set - Alkaline Cleaner, Etch, Rinse, Deox.
Module Two: Anodize and Post-treatment – 4 tanks (3 polypro, 1 SS) 15” x 15” x 15” deep
Tank Set - Anodize, Rinse, Dye, Seal.
- Rectifier: Air-cooled with adjustable ramp, 100A/24V
- Cooling from 6,000 BTU chiller to maintain 70°F process temperature
- Ventilation boxes are fully integrated into the console and ready for exhaust connection
- Moonstone by Kontek 50 gallon batch waste treatment system.
- Hardcoat Rectifier
- Base Frame Support
- Ventilation Hood