Designed for Laboratory Testing & Sampling
Technic’s portable tabletop wafer plating test cell features all the tools needed to simulate full scale production within a laboratory or R&D environment.
- 16” long x 12” wide x 14” deep
- constructed from ½” thick natural polypropylene with flange
- anode rod as required for single side plating
- cathode rod of ¼” x 1” stainless steel with holders
The module features cathode rod knife-edge agitation, complete with variable speed motor, 0-16 RPM, motor mount, cam and connecting arm.
The tank is heated by a 1,000 watt L-type d-rated heater (10 watts/sq. in.) with integral thermal overload protection, digital readout temperature control (+ .25%) and a low solution level shut-off.
The module also features a filter system for continuous filtration and separate agitation pump assembly, complete with natural polypropylene dispersion line with valve. The plating tank, filter pump, agitation pump, etc. is mounted on a common polypropylene base with safety tray approximately 20” x 36”.
The heater, pumps and agitation system are pre-wired to a chemical resistant NEMA 4X fiberglass enclosure. The temperature control with the fuses and circuit breakers and necessary switches for the pumps and agitation system are mounted in a separate fiberglass enclosure. The rectifier (provided separately) plugs into the enclosure. Input voltage 120 V/1ph/60Hz.