Final Finish Solutions for PCB Applications
Technic is well established as a worldwide leader in Final Finish Solutions for printed circuit board applications, as well as connector, lead frame and semiconductor applications. Technic is a major supplier of precious metals, tin and tin alloyed products that are used to preserve, as well as enhance, soldering and bonding through all levels of interconnection. Technic products are formulated to meet the highest industry standards, provide cost savings, and reduce environmental footprints.
TechniPad ENIG & ENEPIG
- Precise activation
- Non-cyanide immersion gold
- Stable electroless palladium
- Flat electroless nickel deposit
Immersion Silver - Argentomerse NC
- Cyanide and Nitrate free
- Excellent uniformity
- Proprietary silver complex
Unlike most immersion silver processes on the market, the Argentomerse NC Process is both cyanide and nitrate-free. It will deposit approximately 0.125 microns (5 uin) of silver per minute on copper and copper alloys. Argentomerse NC is slightly alkaline and, unlike acid processes, the deposition of silver from Argentomerse NC is controlled, yielding more uniform silver thicknesses over a wide range of PCB designs. Argentomerse NC has a wide tolerance for chloride and does not require a pre-dip or DI water rinsing prior to the immersion silver bath.
Immersion Tin - Leveltech
Technic's Leveltech is an immersion tin process with a metallic additive which helps promote solderability and inhibit whisker growth. Leveltech is a direct alternative to HASL and ENIG; it deposits a thickness of between 0.7 and 1 micron of planar tin. The deposit is ideal for subsequent soldering and will withstand up to three thermal cycles.
- Inhibits whisker growth
- Consistent, uniform coating thickness
- Extended storage, up to 12 months
- Multiple thermal exposures without decreased solderability
- Compatible with flux products including no-cleans
- Short process cycle
- Ideal for press fit connections
- Economical to use