Chemistry for Industrial Surface Finishing Applications
Technic offers a number of process solutions for industrial finishing applications, from cleaners, activators, strippers and etchants to our world-renowned plating chemistry. Technic also supplies a full range of anti-tarnish treatments for a wide variety of industrial applications and manufacturing environments.
Soak cleaner for removal of most grease and oils from ferrous and non-ferrous metal.
Technic TSC 1508-L
Water-based alkaline soak cleaner concentrate for ferrous and non-ferrous metals.
Techni Buff Solv
Soak or ultrasonic concentrated alkaline liquid cleaner for removing buffing compounds, tarnish and oxides from copper and brass.
Activators and Etchants
Techni CU 85
Micro Etch used to deoxidize/activate copper based parts prior to electroplating.
Technic Acid Salt TAS-1
Acid activate for steel, brass, copper and passive nickel. Blend of dry acid salts for replacement of sulfuric and hydrochloric acid for pickling metals prior to electroplating. Excellent for chrome stripping.
Technic Acid Salt TAS-3Z
Acid activate for zinc die cast, leaded brass, beryllium copper, aluminum, nickel, silver, tin, and lead. Blend of dry acid salts for pickling metals prior to electroplating.
9025 Gold Stripper
High speed gold stripping formulation for removal of gold from nickel, nickel alloy, kovar, or nickel protected copper base metal.
Techni EN Strip 1700
Non-cyanide, alkaline stripper designed to remove electroless or electrolytic nickel from copper.
Technic Cyless® Silver Strip
Non-cyanide stripper designed to remove silver from copper.
Techni JA Solder Strip
Single-step immersion solder stripper for removal of solder from copper substrate (peroxide/fluoride base).
Technibrite HT 1000
Sulfate bright tin process with superior low current density brightness. Can be run warm up to 35 C. Excellent brightness even when the tin concentration is high and the bath temperature is warm.
High speed matte pure tin plating process for reel-to-reel continuous strip applications. Process based on sulfuric acid electrolyte. Offers significant cost advantages vs. MSA systems.
High speed matte/satin pure tin process based on sulfuric acid technology for wire applications. Offers significant cost advantages to MSA systems.
Techni NF JM 3000
High speed matte pure tin plating process based on MSA, for reel-to-reel continuous strip applications. Techni NF JB 3000 bright tin.
Techni Matte Tin Sulfate 89TI
Matte tin for rack and barrel applications. Low operating cost. Good product for most technology types. Optimum distribution in the range of 15 - 20 ASF.
Matte tin etch resist for rack and barrel applications. Non-foaming process providing a fine grained tin deposit
Techni Silver® 1025
Semi-bright silver with excellent wear resistance for rack and barrel applications.
Techni Silver® 1050
High speed matte to semi-bright 99.9% ductile silver deposit.
Silver Cyless® II
Non-cyanide, semi-bright to bright silver plating process for rack and barrel applications.
CUCN-Bright Copper Cyanide Process
Cyanide copper plate provides a protective coat of copper over the base prior to subsequent plating.
Copper Cyanide Rochelle Strike
Cyanide copper strike designed to give good adhesion and coverage with a relatively low level of thickness, followed by a high deposition bath.
Techni Copper U Solution
Bright acid copper solution used for decorative and electroforming applications
Techni Copper P Solution
A semi to bright pyrophosphate alkaline copper solution used as an alternative to copper cyanide.
For Silver: Organic, thin colorless film with good resistance to corrosion, improved solderability and no effect on electrical performance.
For Silver and Copper: Thin colorless film with good resistance to corrosion, improved solderability and no effect on electrical performance
Tarniban® KS II
For Silver and Gold: Can be applied by immersion or anodically for increased protection. Passes sulfide stain tests.