Tumbleplaters are typically built in two-station modules, plating and dragout/rinse. A series of Tumbleplater modules are combined to create an entire Tumbleplater production line.
Because the Tumbleplater rates of deposition may more than double those of conventional barrel lines, and fewer rinse stations are required, the overall size of a Tumbleplater line can be noticeably smaller than that of a conventional barrel line with the same capacity.
| Model | TTP5-70 | TTP10-100 |
|---|---|---|
| Load Capacity | 0.5 cu. ft. 60 lbs. |
1.0 cu. ft. 100 lbs. |
| equivalent Barrel size | 10" x 18" | 14" x 30" |
| Tank size: width, dot | 41.5" x 29.5" | 53.5" x 29.5" |
| Approximate tank capacity | 100 gallons | 125 gallons |
| Belt speed range | 5 - 30 fpm | |
| Equivalent barrel rpm | 2 - 12 rpm | 2 - 8 rpm |
| Plating area* | 215 sq. in (1.5 sq. ft.) |
340 sq. in. (2.4 sq. ft.) |
Chemistry Overview | Precious Metals | Non-Precious Metals | Pretreatment | Specialty | PWB | Semiconductor
Overview | Rack & Barrel | Reel-to-Reel | SFT | Catalog | Real Time Analyzer | Waste Treatment | Used & Surplus
|
For chemistry and equipment, Technic has the solutions! |
 |