TechnicHS Flow Cell

The Technic HS Flow Cell is designed for laboratory use or as a portable test unit to simulate high speed plating applications such as reel-to-reel or lead frame plating. The cell is constructed of white polypropylene with support flange and convenient storage compartment. The unit can be supplied with a case to allow for transportation to different labs or facilities.

Features:

• Plating area 10" long x 4.5" wide. Adjustable controlled depth plating of 3.5" to 4.5"
• Two 3/8" dia. stainless steel anode rods, rod holders, titanium anode baskets, and anode bags
• stainless steel cathode rod connected to knife edge cathode agitation system
• double pass PVC solution sparger connected to in-tank filter system
• teflon heater with digital readout temperature

Specifications:

• Footprint: 27" long x 19" high x 19" wide
• Capacity: Approx. 1.5 gallons of solution
• Heat-up time from 70°F ambient to:
           110°F - 1 hour          140°F - 2 hours
• Utility inputs available are: 120; 208; 230; 240 volt-1ph-50/60hz. (specify one)